Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Keyboard
- 5 steps
Flags
0
BackToshiba Satellite L875D-S7210
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Starting on either side, use a metal spudger to pry out the long, narrow plastic covering at the bottom of the keyboard.
Starting on either side, use a metal spudger to pry out the long, narrow plastic covering at the bottom of the keyboard.
1024
Step 2
- Gently remove the plastic strip from the keyboard.
Gently remove the plastic strip from the keyboard.
Step 3
- Using your hands, gently lift the keyboard out of the computer. The keyboard will still be attached to the computer so be careful not to pull too hard.
Using your hands, gently lift the keyboard out of the computer. The keyboard will still be attached to the computer so be careful not to pull too hard.
Step 4
- Find the ribbon cable that connects the keyboard to the computer.
Find the ribbon cable that connects the keyboard to the computer.
Step 5
- Place the metal spudger underneath the lockable connector.
- Lift up to unlock the lockable connector
- Remove the ribbon cable from the keyboard and you will have successfully removed from your laptop. Reverse this process to attach the new keyboard.
Place the metal spudger underneath the lockable connector.
Lift up to unlock the lockable connector
Remove the ribbon cable from the keyboard and you will have successfully removed from your laptop. Reverse this process to attach the new keyboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Ian M Sloop
Member since: 10/20/2018
667 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
UC Davis, Team S7-G7, Lore Fall 2018
Member of UC Davis, Team S7-G7, Lore Fall 2018
UCD-LORE-F18S7G7
4 Members
4 Guides authored
