Toshiba Satellite L855 S5119 Random Access Memory Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          2 minutes

Sections

Battery
3 steps
Back Plate Removal
1 step
Random Access Memory
2 steps

Flags

BackToshiba Satellite L855-S5119
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn the laptop face down to expose the back.
Locate the battery.

Turn the laptop face down to expose the back.

Locate the battery.

1024

Step 2

Locate the battery latches. The battery latch mechanism can be compared to a door – The right latch, when pushed right, unlocks the battery, while the left latch, when pushed left, releases the battery, pushing it out from its container.
Push the latch on the right to the right to unlock the battery latch locking mechanism.
Push the battery latch on the left to the left to unlock the battery.

Locate the battery latches. The battery latch mechanism can be compared to a door – The right latch, when pushed right, unlocks the battery, while the left latch, when pushed left, releases the battery, pushing it out from its container.

Push the latch on the right to the right to unlock the battery latch locking mechanism.

Push the battery latch on the left to the left to unlock the battery.

Step 3

With the left battery latch pushed left, remove the battery from its port by lifting the battery from the middle of the battery.
The battery will come free.

With the left battery latch pushed left, remove the battery from its port by lifting the battery from the middle of the battery.

The battery will come free.

Step 4

              Back Plate Removal

Turn the laptop over to place it top down.
Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.
Lift the back plate off the laptop, exposing the RAM and Hard Disk.

Turn the laptop over to place it top down.

Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.

Lift the back plate off the laptop, exposing the RAM and Hard Disk.

Step 5

              Random Access Memory

Locate the Random Access Memory.

Locate the Random Access Memory.

Step 6

Pull back the two retention clips holding the RAM in place allowing it to pop up.
Remove the RAM by pulling it from the SO-DIMM slot.

Pull back the two retention clips holding the RAM in place allowing it to pop up.

Remove the RAM by pulling it from the SO-DIMM slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Cody Brannen

Member since: 02/12/2018

189 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Washington State, Team S1-G5, Lobnitz Spring 2018                        

                                                  Member of Washington State, Team S1-G5, Lobnitz Spring 2018 



                    WSU-LOBNITZ-S18S1G5                     


                                            4 Members                     


                                            9 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team