Difficulty
Easy
Steps
3
Time Required
1 minute
Sections
2
- Back Plate Removal
- 1 step
- Optical Drive
- 2 steps
Flags
0
BackToshiba Satellite L855-S5119
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Plate Removal
- Turn the laptop over to place it top down.
- Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.
- Lift the back plate off the laptop, exposing the RAM and Hard Disk.
Turn the laptop over to place it top down.
Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.
Lift the back plate off the laptop, exposing the RAM and Hard Disk.
1024
Step 2
Optical Drive
- Using a Phillips #0 screwdriver, remove the single 3mm screw.
Using a Phillips #0 screwdriver, remove the single 3mm screw.
Step 3
- Rotate the laptop so that you have access to the optical drive.
- The optical drive is now only attached by a port in the drive’s back. The optical drive can be pulled straight out of its housing.
- Remove the drive.
Rotate the laptop so that you have access to the optical drive.
The optical drive is now only attached by a port in the drive’s back. The optical drive can be pulled straight out of its housing.
Remove the drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Tyler Shafer
Member since: 02/12/2018
423 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Washington State, Team S1-G5, Lobnitz Spring 2018
Member of Washington State, Team S1-G5, Lobnitz Spring 2018
WSU-LOBNITZ-S18S1G5
4 Members
9 Guides authored