Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Keyboard
- 5 steps
- Screen
- 4 steps
Flags
4
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackToshiba Satellite L655D-S5095
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Locate the battery locks on the bottom of the laptop.
- Slide the right lock outwards, until it locks into place.
- Slide and hold the left lock outwards and hold it in place.
Locate the battery locks on the bottom of the laptop.
Slide the right lock outwards, until it locks into place.
Slide and hold the left lock outwards and hold it in place.
1024
Step 2
- While holding the lock in place, slide the battery out towards you.
While holding the lock in place, slide the battery out towards you.
Step 3
Keyboard
- Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
Step 4
- Use a plastic opening tool to pry off the plastic panel above the keyboard.
Use a plastic opening tool to pry off the plastic panel above the keyboard.
Step 5
- Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
Step 6
- Slowly lift the keyboard out, up and towards the screen.
- Do not try to remove the keyboard completely because it is still attached to the motherboard.
Slowly lift the keyboard out, up and towards the screen.
Do not try to remove the keyboard completely because it is still attached to the motherboard.
Step 7
- Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
Step 8
Screen
- Remove stickers from four corners of laptop.
- Remove screws underneath stickers.
Remove stickers from four corners of laptop.
Remove screws underneath stickers.
Step 9
- Use plastic opening tool to pry the hinges off.
- Remove the screen cover.
- Unscrew the six screws on the bottom of the screen near the top of the hinges.
Use plastic opening tool to pry the hinges off.
Remove the screen cover.
Unscrew the six screws on the bottom of the screen near the top of the hinges.
Step 10
- Remove cable located next to the fan.
- Fold down screen without screen back cover to remove cable as shown.
Remove cable located next to the fan.
Fold down screen without screen back cover to remove cable as shown.
Step 11
- Unscrew both screws on each side of the screen.
- Remove the screen.
Unscrew both screws on each side of the screen.
Remove the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Christopher Camara
Member since: 03/11/2014
194 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 4-4, Calaway Spring 2014
Member of UMass Dartmouth, Team 4-4, Calaway Spring 2014
UMASSD-CALAWAY-S14S4G4
4 Members
2 Guides authored
Korregan - Mar 16, 2015
Reply
Que éxito esta pagina , muy gran trabajo, soy de Perú y creo que este tipo de trabajos son muy bien valorados, saludos a la distancia.