Difficulty
Difficult
Steps
4
Time Required
15 - 20 minutes
Sections
1
- Chat Camera and Microphone Daughter Board
- 4 steps
Flags
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackToshiba Satellite L655D-S5095
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This will fix:
- A broken video chat cameraA broken microphone
What you need
Step 1
Chat Camera and Microphone Daughter Board
- Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.
- Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.
Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.
Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.
1024
Step 2
- With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.
- Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.
With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.
Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.
Step 3
- Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.
Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.
Step 4
- Carefully disconnect the camera board from the laptop. We used tweezers.
Carefully disconnect the camera board from the laptop. We used tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Robby
Member since: 02/04/2013
52 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 7-7, Maness Winter 2013
Member of Cal Poly, Team 7-7, Maness Winter 2013
CPSU-MANESS-W13S7G7
5 Members
6 Guides authored