Toshiba Satellite L55T B5271 Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          4 - 6 minutes

Sections

Battery
3 steps
Back Panel
1 step
RAM
1 step

Flags

BackToshiba Satellite L55t-B5271
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure you turn the laptop off first.
Close the laptop lid and flip it over so that Toshiba logo is facing down.

Make sure you turn the laptop off first.

Close the laptop lid and flip it over so that Toshiba logo is facing down.

1024

Step 2

Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Step 3

Once the screws are removed, slide the battery pack out of the computer.

Once the screws are removed, slide the battery pack out of the computer.

Step 4

              Back Panel

Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.
Use the plastic opening tool to remove the back cover from the laptop.
Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.

Use the plastic opening tool to remove the back cover from the laptop.

Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Step 5

RAM

This laptop does not have a RAM present. Follow instructions to replace your own.
Evenly press down on the clips on either side of the RAM stick.
To pull out the RAM stick, be sure to align the notches on the RAM stick with the notches in the RAM holder.

This laptop does not have a RAM present. Follow instructions to replace your own.

Evenly press down on the clips on either side of the RAM stick.

To pull out the RAM stick, be sure to align the notches on the RAM stick with the notches in the RAM holder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Carson Longendorfer

Member since: 03/26/2018

268 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S3-G3, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S3-G3, Peak Spring 2018 



                    UMASSD-PEAK-S18S3G3                     


                                            3 Members                     


                                            8 Guides authored

Steve B - Jun 15, 2019

I’ve got this exact model. Stock 6GB of RAM. However, I’ve attempted to upgrade to 8GB and have tried multiple sticks of RAM and no matter what, the computer won’t recognize it. I’ve ensured it’s locked in properly, RAM is functional, even factory reset. All to no success. Any ideas?

Introduction#

What you need#

Team#

Introduction

What you need

Team