Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackToshiba Satellite L455D-S5976
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Unscrew the 4mm screw from the middle panel using a Phillips #1.
Unscrew the 4mm screw from the middle panel using a Phillips #1.
1024
Step 2
- Lift up on the middle panel and remove it.
Lift up on the middle panel and remove it.
Step 3
- Pull the right clip to the right and left clip to the left using your right and left hands respectively.
Pull the right clip to the right and left clip to the left using your right and left hands respectively.
Step 4
- Once the clips have been removed, the RAM will pop up.
Once the clips have been removed, the RAM will pop up.
Step 5
- Slide the RAM out of its position and remove it.
Slide the RAM out of its position and remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
NateJohnson
Member since: 01/26/2014
1,047 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 9-26, Maness Winter 2014
Member of Cal Poly, Team 9-26, Maness Winter 2014
CPSU-MANESS-W14S9G26
4 Members
5 Guides authored
