Difficulty

Moderate

Steps

10

Time Required

                          10 - 15 minutes            

Sections

3

  • Battery
  • 3 steps
  • Bottom Access Panel
  • 2 steps
  • Keyboard
  • 5 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackToshiba Satellite L45-S7423

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Make sure the battery lock switch is switched to the unlocked position.
  • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

Make sure the battery lock switch is switched to the unlocked position.

The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

1024

Step 2

  • Slide the battery release switch to the left.
  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

Slide the battery release switch to the left.

The switch is spring loaded, so you must hold the switch in place while removing the battery.

Step 3

  • Using a finger, lift up the battery.
  • The battery release switch must be held in place.

Using a finger, lift up the battery.

The battery release switch must be held in place.

Step 4

              Bottom Access Panel               
  • Remove the 5 Phillips screws holding the panel in place.
  • These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.

Remove the 5 Phillips screws holding the panel in place.

These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.

Step 5

  • Use a finger to remove the panel by lifting up on the provided removal tab.

Use a finger to remove the panel by lifting up on the provided removal tab.

Step 6

              Keyboard               
  • Remove the two screws holding the keyboard in place.
  • Two 5.7 mm Phillips screws.
  • ‘KB’ is written alongside the screw holes. This indicates the screws hold the keyboard in place.

Remove the two screws holding the keyboard in place.

Two 5.7 mm Phillips screws.

‘KB’ is written alongside the screw holes. This indicates the screws hold the keyboard in place.

Step 7

  • There are three tabs holding the keyboard in place.
  • They are located under the ESC, F8, and DEL keys.
  • Expose the tabs by pressing down on adjacent keys.

There are three tabs holding the keyboard in place.

They are located under the ESC, F8, and DEL keys.

Expose the tabs by pressing down on adjacent keys.

Step 8

  • While you press down the ESC key, push the tab with the spudger to release that side of the keyboard.
  • Use a finger to prevent the keyboard from locking back in place.
  • Repeat the previous step for the tabs under the F8 and DEL keys.

While you press down the ESC key, push the tab with the spudger to release that side of the keyboard.

Use a finger to prevent the keyboard from locking back in place.

Repeat the previous step for the tabs under the F8 and DEL keys.

Step 9

  • Pick up the keyboard. This exposes a cable that connects the keyboard to the laptop.
  • Lift the keyboard gently. The cable connecting it to the computer is a ribbon. If pulled too hard, the ribbon may be damaged.

Pick up the keyboard. This exposes a cable that connects the keyboard to the laptop.

Lift the keyboard gently. The cable connecting it to the computer is a ribbon. If pulled too hard, the ribbon may be damaged.

Step 10

  • Gently unplug the ribbon cable connecting the keyboard to the laptop by pulling horizontally.

Gently unplug the ribbon cable connecting the keyboard to the laptop by pulling horizontally.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Stephen Sippel                     

Member since: 04/16/2013

194 Reputation

                                      9 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team 21-54, Johann Spring 2013                        

                                                  Member of Cal Poly, Team 21-54, Johann Spring 2013 



                    CPSU-JOHANN-S13S21G54                     


                                            4 Members                     


                                            9 Guides authored                     

Darrell - May 3, 2017

Reply

Great instuctions plus photos. Spot on, tx