Difficulty
Easy
Steps
12
Time Required
10 - 15 minutes
Sections
4
- Battery
- 4 steps
- Keyboard
- 4 steps
- Motherboard Cover
- 2 steps
- Speaker
- 2 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackToshiba Satellite m35=s359
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the two sliding battery locks on the underside of the laptop.
Locate the two sliding battery locks on the underside of the laptop.
1024
Step 2
- Locate the right battery lock and slide it to the right.
Locate the right battery lock and slide it to the right.
Step 3
- While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
Step 4
- Remove the battery from the laptop.
Remove the battery from the laptop.
Step 5
Keyboard
- Locate the plastic strip at the top of the keyboard.
- Use a pry tool to remove the plastic strip.
- Using your hands pull out the rest of the plastic strip.
Locate the plastic strip at the top of the keyboard.
Use a pry tool to remove the plastic strip.
Using your hands pull out the rest of the plastic strip.
Step 6
- Use a phillips head #0 screwdriver to remove the two 3.75mm screws holding the keyboard in place.
Use a phillips head #0 screwdriver to remove the two 3.75mm screws holding the keyboard in place.
Step 7
- Lift up the top of the keyboard to remove it.
- Under the keyboard there is a ribbon cable connecting the keyboard to the laptop. Do not just quickly pull out the keyboard.
- Unlock the ribbon cable by pushing on the locks that are located on both sides of ribbon cable.
- Unplug the ribbon cable from the laptop.
Lift up the top of the keyboard to remove it.
Under the keyboard there is a ribbon cable connecting the keyboard to the laptop. Do not just quickly pull out the keyboard.
Unlock the ribbon cable by pushing on the locks that are located on both sides of ribbon cable.
Unplug the ribbon cable from the laptop.
Step 8
- Remove the keyboard completely from the laptop.
Remove the keyboard completely from the laptop.
Step 9
Motherboard Cover
- Remove all 6.75mm screws from the bottom of the laptop. The 3 screws under the battery are 3.75mm.
- Remove all 5.25mm screws from the top of the laptop.
Remove all 6.75mm screws from the bottom of the laptop. The 3 screws under the battery are 3.75mm.
Remove all 5.25mm screws from the top of the laptop.
Step 10
- Unplug the wires highlighted with red squares.
- Using a pry tool and yours hands to remove the motherboard cover.
Unplug the wires highlighted with red squares.
Using a pry tool and yours hands to remove the motherboard cover.
Step 11
Speaker
- Use a phillips head #00 screwdriver to remove the two 5.25mm screws.
Use a phillips head #00 screwdriver to remove the two 5.25mm screws.
Step 12
- Turn the keyboard housing over and disconnect the speaker power wire from the keyboard housing.
- Remove both speakers.
Turn the keyboard housing over and disconnect the speaker power wire from the keyboard housing.
Remove both speakers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
William
Member since: 03/26/2014
869 Reputation
7 Guides authored
Badges:
11
+8 more badges
Team
Clemson, Team 1-2, Benson Spring 2014
Member of Clemson, Team 1-2, Benson Spring 2014
CLEM-BENSON-S14S1G2
3 Members
10 Guides authored
