Difficulty
Easy
Steps
8
Time Required
5 - 10 minutes
Sections
2
- Battery
- 4 steps
- RAM
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Satellite m35=s359
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Locate the two sliding battery locks on the underside of the laptop.
Locate the two sliding battery locks on the underside of the laptop.
1024
Step 2
- Locate the right battery lock and slide it to the right.
Locate the right battery lock and slide it to the right.
Step 3
- While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
Step 4
- Remove the battery from the laptop.
Remove the battery from the laptop.
Step 5
RAM
- Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.
Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.
Step 6
- Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.
Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.
Step 7
- Remove the RAM module by pulling it out at the angle it was rotated to.
Remove the RAM module by pulling it out at the angle it was rotated to.
Step 8
- If you want to replace the second RAM module, apply steps 2 and 3 to do so.
If you want to replace the second RAM module, apply steps 2 and 3 to do so.
To reassemble your device, follow these instructions in reverse order. When placing the RAM chips in, push them down until the levers snap into place after inserting them into the slot.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ricky Baker
Member since: 03/26/2014
217 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
Clemson, Team 1-2, Benson Spring 2014
Member of Clemson, Team 1-2, Benson Spring 2014
CLEM-BENSON-S14S1G2
3 Members
10 Guides authored