Difficulty
Difficult
Steps
20
Time Required
30 - 35 minutes
Sections
6
- Battery
- 4 steps
- Hard Disk Drive
- 4 steps
- RAM
- 4 steps
- Keyboard
- 4 steps
- Motherboard Cover
- 2 steps
- Motherboard
- 2 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackToshiba Satellite m35=s359
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the two sliding battery locks on the underside of the laptop.
Locate the two sliding battery locks on the underside of the laptop.
1024
Step 2
- Locate the right battery lock and slide it to the right.
Locate the right battery lock and slide it to the right.
Step 3
- While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.
Step 4
- Remove the battery from the laptop.
Remove the battery from the laptop.
Step 5
Hard Disk Drive
- Unscrew the screws enough to remove the top cover.
Unscrew the screws enough to remove the top cover.
Step 6
- Remove the cover by lifting the right side up at an angle before removing the entire cover.
Remove the cover by lifting the right side up at an angle before removing the entire cover.
Step 7
- Remove the hard drive from the SATA slot by tugging lightly on the ribbon cable to the right.
Remove the hard drive from the SATA slot by tugging lightly on the ribbon cable to the right.
Step 8
- To separate the hard drive from the caddy, unscrew the two screws.
To separate the hard drive from the caddy, unscrew the two screws.
Step 9
RAM
- Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.
Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.
Step 10
- Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.
Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.
Step 11
- Remove the RAM module by pulling it out at the angle it was rotated to.
Remove the RAM module by pulling it out at the angle it was rotated to.
Step 12
- If you want to replace the second RAM module, apply steps 2 and 3 to do so.
If you want to replace the second RAM module, apply steps 2 and 3 to do so.
Step 13
Keyboard
- Locate the plastic strip at the top of the keyboard.
- Use a pry tool to remove the plastic strip.
- Using your hands pull out the rest of the plastic strip.
Locate the plastic strip at the top of the keyboard.
Use a pry tool to remove the plastic strip.
Using your hands pull out the rest of the plastic strip.
Step 14
- Use a phillips head #0 screwdriver to remove the two 3.75mm screws holding the keyboard in place.
Use a phillips head #0 screwdriver to remove the two 3.75mm screws holding the keyboard in place.
Step 15
- Lift up the top of the keyboard to remove it.
- Under the keyboard there is a ribbon cable connecting the keyboard to the laptop. Do not just quickly pull out the keyboard.
- Unlock the ribbon cable by pushing on the locks that are located on both sides of ribbon cable.
- Unplug the ribbon cable from the laptop.
Lift up the top of the keyboard to remove it.
Under the keyboard there is a ribbon cable connecting the keyboard to the laptop. Do not just quickly pull out the keyboard.
Unlock the ribbon cable by pushing on the locks that are located on both sides of ribbon cable.
Unplug the ribbon cable from the laptop.
Step 16
- Remove the keyboard completely from the laptop.
Remove the keyboard completely from the laptop.
Step 17
Motherboard Cover
- Remove all 6.75mm screws from the bottom of the laptop. The 3 screws under the battery are 3.75mm.
- Remove all 5.25mm screws from the top of the laptop.
Remove all 6.75mm screws from the bottom of the laptop. The 3 screws under the battery are 3.75mm.
Remove all 5.25mm screws from the top of the laptop.
Step 18
- Unplug the wires highlighted with red squares.
- Using a pry tool and yours hands to remove the motherboard cover.
Unplug the wires highlighted with red squares.
Using a pry tool and yours hands to remove the motherboard cover.
Step 19
Motherboard
- Unscrew all the screws indicated by the red circles (The bottom two screws are 10.75mm and the top screw is 5mm).
- Unplug all the wires indicated by the orange squares.
- Some wires may have a lock on them that needs to be pulled out before the wire is removed.
Unscrew all the screws indicated by the red circles (The bottom two screws are 10.75mm and the top screw is 5mm).
Unplug all the wires indicated by the orange squares.
Some wires may have a lock on them that needs to be pulled out before the wire is removed.
Step 20
- At this point the motherboard can be fully removed from the laptop.
At this point the motherboard can be fully removed from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
William
Member since: 03/26/2014
869 Reputation
7 Guides authored
Badges:
11
+8 more badges
Team
Clemson, Team 1-2, Benson Spring 2014
Member of Clemson, Team 1-2, Benson Spring 2014
CLEM-BENSON-S14S1G2
3 Members
10 Guides authored
