Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes            

Sections

3

  • Battery
  • 2 steps
  • Keyboard
  • 4 steps
  • Wireless Card
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackToshiba Satellite L305-S5955

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lock Tabs               
  • Slide the lock tabs outward. The right tab will lock into place, but the left tab must be held in place.

Slide the lock tabs outward. The right tab will lock into place, but the left tab must be held in place.

1024

Step 2

  • When you hear a click, lift up and pull out the battery.

When you hear a click, lift up and pull out the battery.

Step 3

              Keyboard               
  • Use a plastic opening tool to lift out keyboard lining portion located at the top of the keyboard.

Use a plastic opening tool to lift out keyboard lining portion located at the top of the keyboard.

Step 4

  • Remove the 3.6 mm Phillips head PH000 screws securing the keyboard.

Remove the 3.6 mm Phillips head PH000 screws securing the keyboard.

Step 5

  • Use plastic opening tool to pry out the keyboard, starting by the ‘delete’ key in the top right corner.

Use plastic opening tool to pry out the keyboard, starting by the ‘delete’ key in the top right corner.

Step 6

  • Lift the keyboard up and locate the ribbon.
  • Gently pull the ribbon out of its compartment to release it from the motherboard.

Lift the keyboard up and locate the ribbon.

Gently pull the ribbon out of its compartment to release it from the motherboard.

Step 7

              Wireless Card               
  • Detach white and black wires by gently pulling straight up.

Detach white and black wires by gently pulling straight up.

Step 8

  • Unscrew both 3 mm Phillips head PH1 screws and allow the wireless card to pop up.

Unscrew both 3 mm Phillips head PH1 screws and allow the wireless card to pop up.

Step 9

  • Pull the card out vertically.

Pull the card out vertically.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Samuel Baker                     

Member since: 01/30/2017

307 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       IUPUI, Team 1-2, Baechle Spring 2017                        

                                                  Member of IUPUI, Team 1-2, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S1G2                     


                                            4 Members                     


                                            3 Guides authored