Difficulty
Moderate
Steps
5
Time Required
8 - 10 minutes
Sections
2
- Back Panel
- 2 steps
- Fan
- 3 steps
Flags
0
BackToshiba Satellite E45T-A4300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the twelve 5 mm Phillips #1 screws from the back panel.
Remove the twelve 5 mm Phillips #1 screws from the back panel.
1024
Step 2
- Pry the back panel open with the plastic spudger or fingernails.
- Pry it gently so that the back panel does not crack.
Pry the back panel open with the plastic spudger or fingernails.
Pry it gently so that the back panel does not crack.
Step 3
Fan
- Remove the two 5 mm screws using a Phillips #1 screwdriver.
Remove the two 5 mm screws using a Phillips #1 screwdriver.
Step 4
- Gently disconnect the fan cable from the device.
Gently disconnect the fan cable from the device.
Step 5
- Move the wires away from the fan’s hook.
- Remove the fan from the device.
Move the wires away from the fan’s hook.
Remove the fan from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Jose Marques
Member since: 11/01/2018
433 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S1-G4, Simcock Fall 2018
Member of UMass Dartmouth, Team S1-G4, Simcock Fall 2018
UMASSD-SIMCOCK-F18S1G4
3 Members
14 Guides authored