Toshiba Satellite E105 S1602 Keyboard Replacement Repair Guide

Difficulty

Very easy

Steps

8

Time Required

Suggest a time??

Sections

2

• Battery
• 2 steps
• Keyboard
• 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackToshiba Satellite E105-S1602

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Slide both of the latches to the outside to release the battery.

Slide both of the latches to the outside to release the battery.

1024

Step 2

• Pull the battery out by lifting the battery cover away from the laptop.

Pull the battery out by lifting the battery cover away from the laptop.

Step 3

              Keyboard               

• Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.
• Pry the top plastic strip from the top of the keyboard.
• Peel the strip completely away from the keyboard.

Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.

Pry the top plastic strip from the top of the keyboard.

Peel the strip completely away from the keyboard.

Step 4

• Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

Step 5

• When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.
• Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.

Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

Step 6

• Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

Step 7

• Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

Step 8

• Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.
• Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.

Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 9 other contributors 

                    Ian Washburne                     

Member since: 01/11/2013

59 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team 17-21, Forte Winter 2013                        

                                                  Member of Cal Poly, Team 17-21, Forte Winter 2013 



                    CPSU-FORTE-W13S17G21                     


                                            5 Members                     


                                            14 Guides authored