Toshiba Satellite E105 S1602 Front Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

Suggest a time??

Sections

Battery
2 steps
Keyboard
6 steps
Front Panel
9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

BackToshiba Satellite E105-S1602
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Slide both of the latches to the outside to release the battery.

Slide both of the latches to the outside to release the battery.

1024

Step 2

Pull the battery out by lifting the battery cover away from the laptop.

Pull the battery out by lifting the battery cover away from the laptop.

Step 3

              Keyboard

Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.
Pry the top plastic strip from the top of the keyboard.
Peel the strip completely away from the keyboard.

Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.

Pry the top plastic strip from the top of the keyboard.

Peel the strip completely away from the keyboard.

Step 4

Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

Step 5

When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.
Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.

Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

Step 6

Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

Step 7

Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

Step 8

Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.
Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.

Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

Step 9

              Front Panel

Locate the four silver screws on the front panel.
Using the Phillips #0, unscrew to remove all four 2.95mm silver screws.

Locate the four silver screws on the front panel.

Using the Phillips #0, unscrew to remove all four 2.95mm silver screws.

Step 10

Flip the laptop over and locate all seven screws on the bottom of the laptop.
Unscrew all seven Philips#00 7.70mm screws.

Flip the laptop over and locate all seven screws on the bottom of the laptop.

Unscrew all seven Philips#00 7.70mm screws.

Step 11

Locate and unscrew the three silver Philips #00 2.85mm screws inside the battery compartment.
Locate and unscrew the five black Philips #00 3.25mm screws inside the battery compartment.

Locate and unscrew the three silver Philips #00 2.85mm screws inside the battery compartment.

Locate and unscrew the five black Philips #00 3.25mm screws inside the battery compartment.

Step 12

Rotate the laptop so the back faces you.
Locate the two black Philips #00 7.65 screws, one by each hinge, and remove.

Rotate the laptop so the back faces you.

Locate the two black Philips #00 7.65 screws, one by each hinge, and remove.

Step 13

Use the plastic opening tool to pry the top panel up from the base of the computer.
Slowly work your way around the computer with the plastic removing tool to make it easier to lift the top panel away from the base.
Carefully lift the top panel no more than six inches, as there are ribbon cables connecting the two pieces.
Disconnect ribbons, and slowly lift the top panel up, away from the base.

Use the plastic opening tool to pry the top panel up from the base of the computer.

Slowly work your way around the computer with the plastic removing tool to make it easier to lift the top panel away from the base.

Carefully lift the top panel no more than six inches, as there are ribbon cables connecting the two pieces.

Disconnect ribbons, and slowly lift the top panel up, away from the base.

Step 14

Locate the ribbon cable from the motherboard.
Using plastic removing tools, pop the ribbon base from the motherboard.

Locate the ribbon cable from the motherboard.

Using plastic removing tools, pop the ribbon base from the motherboard.

Step 15

Locate the two plugs from the motherboard.
Using plastic opening tools, remove each plug from the motherboard.

Locate the two plugs from the motherboard.

Using plastic opening tools, remove each plug from the motherboard.

Step 16

Locate the ribbon cable partially hidden under the front panel.
Using plastic opening tools, pop out the ribbon cable from the motherboard.

Locate the ribbon cable partially hidden under the front panel.

Using plastic opening tools, pop out the ribbon cable from the motherboard.

Step 17

Make sure that all wires have been disconnected before proceeding to avoid damaging components.
Slowly lift the top panel away from the base of the computer.
Place the top panel away from the computer and keep in a flat non-metallic surface until needed.

Make sure that all wires have been disconnected before proceeding to avoid damaging components.

Slowly lift the top panel away from the base of the computer.

Place the top panel away from the computer and keep in a flat non-metallic surface until needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors

                    Ian Washburne

Member since: 01/11/2013

59 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 17-21, Forte Winter 2013                        

                                                  Member of Cal Poly, Team 17-21, Forte Winter 2013 



                    CPSU-FORTE-W13S17G21                     


                                            5 Members                     


                                            14 Guides authored

Needs Better Images#

Better Introduction#

Introduction#

What you need#

Team#

Needs Better Images

Better Introduction

Introduction

What you need

Team