Difficulty
Easy
Steps
4
Time Required
8 - 10 minutes
Sections
1
- Tablet Battery
- 4 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackToshiba Satellite Click
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Tablet Battery
- Take the pry tool and pry open the backing of the tablet around all four sides and pull off back.
Take the pry tool and pry open the backing of the tablet around all four sides and pull off back.
1024
Step 2
- Use a Phillips #0 Screwdriver to remove four screws in the corners of the battery pack.
Use a Phillips #0 Screwdriver to remove four screws in the corners of the battery pack.
Step 3
- Remove shown wires from clips on the left hand side of the battery before pulling the battery completely out.
Remove shown wires from clips on the left hand side of the battery before pulling the battery completely out.
Step 4
- Remove highlighted plug out of the circuit board before completely removing the battery pack.
Remove highlighted plug out of the circuit board before completely removing the battery pack.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Anthony
Member since: 01/28/2015
113 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Penn State, Team 2-20, Kaschak Winter 2015
Member of Penn State, Team 2-20, Kaschak Winter 2015
PSU-KASCHAK-W15S2G20
5 Members
4 Guides authored