Toshiba Satellite Click 2 L35W B3204 Screen Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Screen
4 steps

Flags

BackToshiba Satellite Click 2 L35W-B3204
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

Begin by inserting the plastic opening tool into the lip that lies between the screen and the plastic housing and gently prying it open. The best place to begin the screen removal is the bottom left side of the screen.
Continue to work your way around the screen with the opening tool until all the clips are undone and the screen is free.
Lift screen off of plastic cover to expose the internal components.

Begin by inserting the plastic opening tool into the lip that lies between the screen and the plastic housing and gently prying it open. The best place to begin the screen removal is the bottom left side of the screen.

Continue to work your way around the screen with the opening tool until all the clips are undone and the screen is free.

Lift screen off of plastic cover to expose the internal components.

1024

Step 2

Locate the wide, golden connection on the bottom of the screen. Use the black spudger to peel away the tape holding it in place.
Use tweezers to gently remove the plug from the screen.

Locate the wide, golden connection on the bottom of the screen. Use the black spudger to peel away the tape holding it in place.

Use tweezers to gently remove the plug from the screen.

Step 3

Trace the black ribbon cable that begins on the right of the screen. This cable is connected to the upper part of the motherboard, which is located near the right speaker.
Using tweezers, gently grasp the plug on the end of the ribbon cable and remove it from the motherboard.

Trace the black ribbon cable that begins on the right of the screen. This cable is connected to the upper part of the motherboard, which is located near the right speaker.

Using tweezers, gently grasp the plug on the end of the ribbon cable and remove it from the motherboard.

Step 4

Your screen is now completely detached from the internal components.

Your screen is now completely detached from the internal components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Lexi Lannigan

Member since: 10/17/2018

753 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team S1-G4, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G4, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G4                     


                                            6 Members                     


                                            12 Guides authored

Thomas Cirillo - Sep 11, 2022

This instruction set was VERY useful, since it focused on the exact device that I have, and had great photos to accompany the steps. TC

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team