Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Screen
  • 4 steps
  • Battery
  • 4 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackToshiba Satellite Click 2 L35W-B3204

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Begin by inserting the plastic opening tool into the lip that lies between the screen and the plastic housing and gently prying it open. The best place to begin the screen removal is the bottom left side of the screen.
  • Continue to work your way around the screen with the opening tool until all the clips are undone and the screen is free.
  • Lift screen off of plastic cover to expose the internal components.

Begin by inserting the plastic opening tool into the lip that lies between the screen and the plastic housing and gently prying it open. The best place to begin the screen removal is the bottom left side of the screen.

Continue to work your way around the screen with the opening tool until all the clips are undone and the screen is free.

Lift screen off of plastic cover to expose the internal components.

1024

Step 2

  • Locate the wide, golden connection on the bottom of the screen. Use the black spudger to peel away the tape holding it in place.
  • Use tweezers to gently remove the plug from the screen.

Locate the wide, golden connection on the bottom of the screen. Use the black spudger to peel away the tape holding it in place.

Use tweezers to gently remove the plug from the screen.

Step 3

  • Trace the black ribbon cable that begins on the right of the screen. This cable is connected to the upper part of the motherboard, which is located near the right speaker.
  • Using tweezers, gently grasp the plug on the end of the ribbon cable and remove it from the motherboard.

Trace the black ribbon cable that begins on the right of the screen. This cable is connected to the upper part of the motherboard, which is located near the right speaker.

Using tweezers, gently grasp the plug on the end of the ribbon cable and remove it from the motherboard.

Step 4

  • Your screen is now completely detached from the internal components.

Your screen is now completely detached from the internal components.

Step 5

              Battery
  • Remove the copper shield by removing the four Phillips screws that hold the shield in place.

Remove the copper shield by removing the four Phillips screws that hold the shield in place.

Step 6

  • Unplug the battery from the motherboard by pushing the white clip with a metal spudger. You can attempt to use the plastic spudger first, but it may be more difficult.

Unplug the battery from the motherboard by pushing the white clip with a metal spudger. You can attempt to use the plastic spudger first, but it may be more difficult.

Step 7

  • Remove 2 6mm Phillips #0 screws holding the battery in place.

Remove 2 6mm Phillips #0 screws holding the battery in place.

Step 8

  • Remove the battery by lifting on the left side, while holding the ribbon cable above it out of the way.

Remove the battery by lifting on the left side, while holding the ribbon cable above it out of the way.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Lexi Lannigan

Member since: 10/17/2018

753 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team S1-G4, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G4, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G4                     


                                            6 Members                     


                                            12 Guides authored