Difficulty

Moderate

Steps

11

Time Required

                          25 minutes

Sections

2

  • Battery
  • 6 steps
  • Screen Display Assembly
  • 5 steps

Flags

0

  • BackToshiba Satellite CL15t-B1204X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so the bottom of the device is facing upward.

Flip the laptop over so the bottom of the device is facing upward.

1024

Step 2

  • Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.

Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.

Step 3

  • Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
  • Be careful not to bend or crack the plastic back cover.

Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.

Be careful not to bend or crack the plastic back cover.

Step 4

  • Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.

Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.

Step 5

  • Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.

Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.

Step 6

  • Carefully unplug the battery from the device motherboard.

Carefully unplug the battery from the device motherboard.

Step 7

              Screen Display Assembly
  • Unplug the power connector by pulling back the tape and sliding the connector away using the blue opening tool.

Unplug the power connector by pulling back the tape and sliding the connector away using the blue opening tool.

Step 8

  • Remove the foam and unplug the black and white coaxial cables to the network card by pulling upward using the black tweezers.

Remove the foam and unplug the black and white coaxial cables to the network card by pulling upward using the black tweezers.

Step 9

  • Remove the black webcam connector by pulling backwards with the tweezers.

Remove the black webcam connector by pulling backwards with the tweezers.

Step 10

  • Using a Phillips #1 screwdriver, remove four 5.00 mm screws from both corner hinges of the display assembly.

Using a Phillips #1 screwdriver, remove four 5.00 mm screws from both corner hinges of the display assembly.

Step 11

  • Open the laptop and remove the display assembly from the keyboard assembly.

Open the laptop and remove the display assembly from the keyboard assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Matthew Hook

Member since: 03/25/2019

439 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S1-G6, Hovde Fall 2019                        

                                                  Member of IUPUI, Team S1-G6, Hovde Fall 2019 



                    IUPUI-HOVDE-F19S1G6                     


                                            4 Members                     


                                            6 Guides authored