Difficulty
Easy
Steps
8
Time Required
10 minutes
Sections
2
- Battery
- 6 steps
- Power Connector
- 2 steps
Flags
0
BackToshiba Satellite CL15t-B1204X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over so the bottom of the device is facing upward.
Flip the laptop over so the bottom of the device is facing upward.
1024
Step 2
- Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.
Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.
Step 3
- Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
- Be careful not to bend or crack the plastic back cover.
Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
Be careful not to bend or crack the plastic back cover.
Step 4
- Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.
Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.
Step 5
- Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.
Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.
Step 6
- Carefully unplug the battery from the device motherboard.
Carefully unplug the battery from the device motherboard.
Step 7
Power Connector
- Disconnect the charging connector from the motherboard using the blue iFixIt opening tool by sliding it away from the connector.
Disconnect the charging connector from the motherboard using the blue iFixIt opening tool by sliding it away from the connector.
Step 8
- Pry the power connector upwards from the side of the laptop using the opening tool, then remove the part from the laptop.
Pry the power connector upwards from the side of the laptop using the opening tool, then remove the part from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Matthew Hook
Member since: 03/25/2019
439 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team S1-G6, Hovde Fall 2019
Member of IUPUI, Team S1-G6, Hovde Fall 2019
IUPUI-HOVDE-F19S1G6
4 Members
6 Guides authored