Difficulty
Moderate
Steps
9
Time Required
5 minutes
Sections
2
- Battery
- 6 steps
- Hard Drive
- 3 steps
Flags
3
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Satellite CL15t-B1204X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Flip the laptop over so the bottom of the device is facing upward.
Flip the laptop over so the bottom of the device is facing upward.
1024
Step 2
- Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.
Unscrew the 10 5mm Phillips screws, located on the bottom side of the notebook using the PH1 bit and the Magnetic Driver.
Step 3
- Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
- Be careful not to bend or crack the plastic back cover.
Pry open the bottom cover of the notebook with the plastic spudger tools. Slide a thin tool along the edges without ports to pop open the latches.
Be careful not to bend or crack the plastic back cover.
Step 4
- Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.
Remove the 1" yellow tape on top of the battery. This piece of tape is holding down the battery connection cable.
Step 5
- Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.
Lightly grip the battery on the two longest sides. Gently pull up until the adhesive on the notebook is separated from the battery.
Step 6
- Carefully unplug the battery from the device motherboard.
Carefully unplug the battery from the device motherboard.
Step 7
Hard Drive
- Carefully unplug the cable near the USB on the left side.
Carefully unplug the cable near the USB on the left side.
Step 8
- Delicately pull on the hard drive and the case it’s in to unplug it from the motherboard.
Delicately pull on the hard drive and the case it’s in to unplug it from the motherboard.
Step 9
- Peal the rubber casing around the hard drive off to completely remove the drive.
Peal the rubber casing around the hard drive off to completely remove the drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Royce Alexander Porter
Member since: 09/10/2018
643 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Appalachian State University, Team S2-G3, Menagarishvili Fall 2018
Member of Appalachian State University, Team S2-G3, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S2G3
3 Members
9 Guides authored
Hammerjockey Radios - Feb 19, 2020
Reply
What kind of joke is this?! Spent an hour taking my toshiba apart and THERE IS NO DRIVE IN HERE!!!! WTF
Kamal Badiyani - Jan 8, 2021
Reply
Do we change ssd hearddisk 240gb with same ram
Ernesto Filho - Sep 6, 2021
Reply
I agree with Hammerjockey Radios, you guys should be more clear. there’s no drive on this model.