Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

2

  • Battery
  • 2 steps
  • Hard Drive
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackToshiba Satellite C675-S7106

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over, so that the “top” of the laptop is against your working surface.
  • Orient the laptop so that the silver label is in the bottom-left corner, with the battery facing you.

Flip the laptop over, so that the “top” of the laptop is against your working surface.

Orient the laptop so that the silver label is in the bottom-left corner, with the battery facing you.

1024

Step 2

  • On the right side of the battery, move the tab marked 1 to the right, unlocking the battery.
  • On the left side of the battery, hold the tab marked 2 to the left while pulling the battery towards you.

On the right side of the battery, move the tab marked 1 to the right, unlocking the battery.

On the left side of the battery, hold the tab marked 2 to the left while pulling the battery towards you.

Step 3

              Hard Drive
  • Rotate the laptop so that the battery cavity faces away from you.
  • Remove the lower-left plastic panel by loosening the single PH0-head screw and prying it up with a plastic spudger.
  • The screw does not need to be completely removed, as it’s permanently attached to the device.

Rotate the laptop so that the battery cavity faces away from you.

Remove the lower-left plastic panel by loosening the single PH0-head screw and prying it up with a plastic spudger.

The screw does not need to be completely removed, as it’s permanently attached to the device.

Step 4

  • Remove the existing drive by sliding it towards the left until it’s disconnected, and then lift it out of the device.

Remove the existing drive by sliding it towards the left until it’s disconnected, and then lift it out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Dinis Valcorba

Member since: 03/26/2019

292 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S1-G2, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G2, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S1G2                     


                                            3 Members                     


                                            12 Guides authored