Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
1
- LCD
- 8 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackToshiba Satellite C655D-S5200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD
- Here is the Toshiba Satellite C655D-S5200
- Open the laptop with the LCD facing forward. There are four rubber caps, one in each corner
- Removing the plugs reveal the Phillips screws
Here is the Toshiba Satellite C655D-S5200
Open the laptop with the LCD facing forward. There are four rubber caps, one in each corner
Removing the plugs reveal the Phillips screws
1024
Step 2
- Remove all four screws, tow on top left and right corner
- One on the bottom left corner
- and the bottom right corner.
- Here are the four M3x5mm screws
Remove all four screws, tow on top left and right corner
One on the bottom left corner
and the bottom right corner.
Here are the four M3x5mm screws
Step 3
- Use a plastic opening tool, or similar to pop the bezel of the LCD assembly
- Continue to slide the tool all the way across the top
- Once the bezel has been released from the tabs, it can be further released be applying some gently manual pulling
Use a plastic opening tool, or similar to pop the bezel of the LCD assembly
Continue to slide the tool all the way across the top
Once the bezel has been released from the tabs, it can be further released be applying some gently manual pulling
Step 4
- Continue to pull gently on the sides
- and finally on the bottom.
- With all the tabs released the bezel can now be removed.
Continue to pull gently on the sides
and finally on the bottom.
With all the tabs released the bezel can now be removed.
Step 5
- Here is the LCD assembly without the bezel
- Remove the Phillips screw that connects the LCD frame to the back cover. This is the left one
- Remove the right one as well
Here is the LCD assembly without the bezel
Remove the Phillips screw that connects the LCD frame to the back cover. This is the left one
Remove the right one as well
Step 6
- The LCD can now be moved forward and away from the rear cover
- There are three screws on either side that hold the panel to the frame. Remove those
- Here are the three M2x4 screws
The LCD can now be moved forward and away from the rear cover
There are three screws on either side that hold the panel to the frame. Remove those
Here are the three M2x4 screws
Step 7
- Remove the three Phillips screws on the right side as well.
- with the screws removed the panel can now be moved out of the LCD frame. The LCD is still connected by the display cable.
- The display cable is secured to the connector with some clear adhesive. Remove this frist
Remove the three Phillips screws on the right side as well.
with the screws removed the panel can now be moved out of the LCD frame. The LCD is still connected by the display cable.
The display cable is secured to the connector with some clear adhesive. Remove this frist
Step 8
- Remove the display cable carefully.
- With the display cable disconnected, the LCD can now be removed and replaced.
Remove the display cable carefully.
With the display cable disconnected, the LCD can now be removed and replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
oldturkey03
Member since: 09/29/2010
722,317 Reputation
109 Guides authored
Badges:
53
+50 more badges
Team
Global Fixers
Member of Global Fixers
Community
22 Members
240 Guides authored
