Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 3 steps
Flags
0
BackToshiba Satellite C55D-A5201
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Close the laptop, and flip it upside down. You want the spine to be furthest away from you.
Close the laptop, and flip it upside down. You want the spine to be furthest away from you.
1024
Step 2
- Release the locking mechanism by switching the left slider to the left.
Release the locking mechanism by switching the left slider to the left.
Step 3
- Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.
Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.
Step 4
RAM
- With the Phillips #0 screwdriver, unscrew the 4.6mm screw on the left side of the “L”-shaped covering.
With the Phillips #0 screwdriver, unscrew the 4.6mm screw on the left side of the “L”-shaped covering.
Step 5
- Lift up the “L”-shaped plastic covering to remove it.
Lift up the “L”-shaped plastic covering to remove it.
Step 6
- Push the two metal prongs on either side of the RAM module away from the module simultaneously.
- Lift up the RAM module to remove.
Push the two metal prongs on either side of the RAM module away from the module simultaneously.
Lift up the RAM module to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 6 other contributors
Ashley Cannon
Member since: 03/24/2015
156 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Baylor, Team 6-5, Shaver Spring 2015
Member of Baylor, Team 6-5, Shaver Spring 2015
BU-SHAVER-S15S6G5
3 Members
8 Guides authored
