Difficulty
Easy
Steps
10
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Keyboard
- 7 steps
Flags
0
BackToshiba Satellite C55D-A5201
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Close the laptop, and flip it upside down. You want the spine to be furthest away from you.
Close the laptop, and flip it upside down. You want the spine to be furthest away from you.
1024
Step 2
- Release the locking mechanism by switching the left slider to the left.
Release the locking mechanism by switching the left slider to the left.
Step 3
- Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.
Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.
Step 4
Keyboard
- Remove the 3mm Phillips #00 screw holding the keyboard in place.
Remove the 3mm Phillips #00 screw holding the keyboard in place.
Step 5
- Flip over and open the laptop.
Flip over and open the laptop.
Step 6
- Slip the plastic opening tool under the “Enter” key on the right corner of the keyboard.
- Lift the plastic opening tool up until the corner of the keyboard is detached.
- You will hear a popping sound as each portion of the keyboard becomes detached.
Slip the plastic opening tool under the “Enter” key on the right corner of the keyboard.
Lift the plastic opening tool up until the corner of the keyboard is detached.
You will hear a popping sound as each portion of the keyboard becomes detached.
Step 7
- Slide the plastic opening tool slowly along the bottom of the keyboard towards the left.
- Continue up the left side of the keyboard.
Slide the plastic opening tool slowly along the bottom of the keyboard towards the left.
Continue up the left side of the keyboard.
Step 8
- Lift the keyboard up by grabbing it on both sides.
- Set the keyboard against the laptop screen.
Lift the keyboard up by grabbing it on both sides.
Set the keyboard against the laptop screen.
Step 9
- Using tweezers, push up the two black switches on either side of the ZIF connector.
Using tweezers, push up the two black switches on either side of the ZIF connector.
Step 10
- Pull out the ZIF connector to release the keyboard.
- Lift up the keyboard.
Pull out the ZIF connector to release the keyboard.
Lift up the keyboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
Author
with 4 other contributors
Kari Byrd
Member since: 03/24/2015
614 Reputation
1 Guide authored
Badges:
13
+10 more badges
Team
Baylor, Team 6-5, Shaver Spring 2015
Member of Baylor, Team 6-5, Shaver Spring 2015
BU-SHAVER-S15S6G5
3 Members
8 Guides authored