Toshiba Satellite C55D A5108 Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes            

Sections

2

• Battery
• 3 steps
• Keyboard
• 3 steps

Flags

0

• BackToshiba Satellite C55D-A5108

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip over the device so that the model stickers are facing up.

Flip over the device so that the model stickers are facing up.

1024

Step 2

• Move the right notch to the unlock position by sliding it to the right.

Move the right notch to the unlock position by sliding it to the right.

Step 3

• Hold the left notch in an unlocked position with one hand and use the other hand to slide the battery out.

Hold the left notch in an unlocked position with one hand and use the other hand to slide the battery out.

Step 4

              Keyboard               

• Open the device so that the keyboard is visible.
• Slip the wide tip of the spudger underneath the Enter key on the keyboard.

Open the device so that the keyboard is visible.

Slip the wide tip of the spudger underneath the Enter key on the keyboard.

Step 5

• Slowly slide the spudger along the perimeter of the keyboard in a clockwise manner until you’ve reached the top left corner.
• Lift the keyboard at an angle.
• Be aware to not lift the keyboard too forcefully as to not damage anything.

Slowly slide the spudger along the perimeter of the keyboard in a clockwise manner until you’ve reached the top left corner.

Lift the keyboard at an angle.

Be aware to not lift the keyboard too forcefully as to not damage anything.

Step 6

• Use the pointed tip of the spudger to open the notches on the ribbon cable directly attached to the device.
• Pull the connector out of its slot and lift the keyboard out of the device.

Use the pointed tip of the spudger to open the notches on the ribbon cable directly attached to the device.

Pull the connector out of its slot and lift the keyboard out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Michael Medeiros                     

Member since: 10/25/2019

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S1-G5, O'Connell Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G5, O'Connell Fall 2019 



                    UMASSD-O'CONNELL-F19S1G5                     


                                            3 Members                     


                                            12 Guides authored