Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes            

Sections

3

  • Battery
  • 2 steps
  • Back cover
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackToshiba Satellite C55-C5240

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Make sure you turn off the laptop before starting.
  • Remove the two 6.5mm PH1 Phillips screws securing the battery.

Make sure you turn off the laptop before starting.

Remove the two 6.5mm PH1 Phillips screws securing the battery.

1024

Step 2

  • Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

Step 3

              Back cover               
  • Unscrew the ten 6.5mm PH1 Phillips head screws that hold down the back cover.

Unscrew the ten 6.5mm PH1 Phillips head screws that hold down the back cover.

Step 4

  • Using the plastic opening tools, open the back cover and remove it from the laptop.
  • It is recommended that you start from a corner and run the tool along the edge of the cover.
  • Be careful not to bend or crack the cover.

Using the plastic opening tools, open the back cover and remove it from the laptop.

It is recommended that you start from a corner and run the tool along the edge of the cover.

Be careful not to bend or crack the cover.

Step 5

              RAM               
  • The RAM is at the upper middle area of the motherboard.
  • Push down on the clips on either side of the RAM stick evenly.
  • It will come loose in an angle once the clips are released.

The RAM is at the upper middle area of the motherboard.

Push down on the clips on either side of the RAM stick evenly.

It will come loose in an angle once the clips are released.

Step 6

  • Simply pull out the RAM stick.
  • These steps work for both sticks of RAM.

Simply pull out the RAM stick.

These steps work for both sticks of RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Angela Rodriguez                     

Member since: 02/28/2017

261 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team S1-G5, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S1-G5, Nance Spring 2017 



                    USFT-NANCE-S17S1G5                     


                                            3 Members                     


                                            12 Guides authored