Difficulty
Difficult
Steps
8
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Keyboard
- 6 steps
Flags
0
BackToshiba Satellite C55-B5200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop off and remove all sources of power.
- Flip the laptop over so that way the bottom is facing towards you.
- Remove the two 6.6mm Phillips #0 screws from the battery.
Turn the laptop off and remove all sources of power.
Flip the laptop over so that way the bottom is facing towards you.
Remove the two 6.6mm Phillips #0 screws from the battery.
1024
Step 2
- Pull the battery out of the laptop.
Pull the battery out of the laptop.
Step 3
Keyboard
- Remove the thirteen 6.6mm Phillips #0 screws on the back of the device.
Remove the thirteen 6.6mm Phillips #0 screws on the back of the device.
Step 4
- Use a plastic opening tool to lift and remove the bottom panel.
Use a plastic opening tool to lift and remove the bottom panel.
Step 5
- Remove the six 2.3mm Phillips #0 screws from the motherboard.
- Use a pair of tweezers to lift up the tab on the ZIF connector and pull out the ribbon cable.
Remove the six 2.3mm Phillips #0 screws from the motherboard.
Use a pair of tweezers to lift up the tab on the ZIF connector and pull out the ribbon cable.
Step 6
- Disconnect the wires from the motherboard.
- Lift and remove the disk drive.
- Lift and remove the hard drive.
Disconnect the wires from the motherboard.
Lift and remove the disk drive.
Lift and remove the hard drive.
Step 7
- Lift up the motherboard
- Use tweezers to carefully peel apart IDE ribbon cables connected from motherboard to keyboard
Lift up the motherboard
Use tweezers to carefully peel apart IDE ribbon cables connected from motherboard to keyboard
Step 8
- Use a plastic opening tool to unlatch the keyboard from the device
- Lift the keyboard off the laptop, careful of the IDE ribbon cable
Use a plastic opening tool to unlatch the keyboard from the device
Lift the keyboard off the laptop, careful of the IDE ribbon cable
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Pablo Andrade
Member since: 02/14/2018
1,057 Reputation
7 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team S3-G1, Nance Spring 2018
Member of USF Tampa, Team S3-G1, Nance Spring 2018
USFT-NANCE-S18S3G1
4 Members
15 Guides authored
Mark Puga - Dec 20, 2022
Reply
gracias por la guía
