Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Hard Disk Drive
- 1 step
Flags
0
BackToshiba Satellite C55-B5200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop off and remove all sources of power.
- Flip the laptop over so that way the bottom is facing towards you.
- Remove the two 6.6mm Phillips #0 screws from the battery.
Turn the laptop off and remove all sources of power.
Flip the laptop over so that way the bottom is facing towards you.
Remove the two 6.6mm Phillips #0 screws from the battery.
1024
Step 2
- Pull the battery out of the laptop.
Pull the battery out of the laptop.
Step 3
Hard Disk Drive
- Remove the two 4.6mm Phillips #0 screws from disk drive.
- Lift the disk drive and pull out to remove.
Remove the two 4.6mm Phillips #0 screws from disk drive.
Lift the disk drive and pull out to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
Pablo Andrade
Member since: 02/14/2018
1,057 Reputation
7 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team S3-G1, Nance Spring 2018
Member of USF Tampa, Team S3-G1, Nance Spring 2018
USFT-NANCE-S18S3G1
4 Members
15 Guides authored
stevesd619 - Jun 20, 2020
Reply
Pablo, you didn’t mention that you must remove all the screws to get at the hard drive. What a pain. Other satellites have compartments the c55 that i have you must take every screw out as the back is one piece. Thanks for the instructions.