Difficulty
Easy
Steps
8
Time Required
3 minutes
Sections
3
- Battery
- 2 steps
- Hard Drive
- 4 steps
- CD Drive
- 2 steps
Flags
0
BackToshiba Satellite C55-A5300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- With the Laptop off, turn it over.
- The battery is located next to the screen hinges.
- Move the locking tab located directly above the battery on the right side, all the way to the left. It will stay in place by itself.
With the Laptop off, turn it over.
The battery is located next to the screen hinges.
Move the locking tab located directly above the battery on the right side, all the way to the left. It will stay in place by itself.
1024
Step 2
- Slide the tab identical to the first one on the right side above the battery pack to the right. This tab is spring loaded, so be sure to hold it.
- Insert your tool or your fingernail into the notch just above the center of the battery pack, and lift the battery pack out of the device.
Slide the tab identical to the first one on the right side above the battery pack to the right. This tab is spring loaded, so be sure to hold it.
Insert your tool or your fingernail into the notch just above the center of the battery pack, and lift the battery pack out of the device.
Step 3
Hard Drive
- Unscrew the screw on the back panel of the laptop covering the hard drive.
Unscrew the screw on the back panel of the laptop covering the hard drive.
Step 4
- Use the plastic opening tools to remove the panel.
Use the plastic opening tools to remove the panel.
Step 5
- Remove the screw next to the hard drive using the PH1 screwdriver.
Remove the screw next to the hard drive using the PH1 screwdriver.
Step 6
- Pull the silver tab connected to the hard drive up to take it out.
Pull the silver tab connected to the hard drive up to take it out.
Step 7
CD Drive
- Remove the screw to the top right of the hard drive using the PH1 screwdriver.
Remove the screw to the top right of the hard drive using the PH1 screwdriver.
Step 8
- Use the plastic opening tool to wedge between the CD Drive and the laptop casing and gently pull it out.
Use the plastic opening tool to wedge between the CD Drive and the laptop casing and gently pull it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
David Burleson
Member since: 09/09/2018
391 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
Appalachian State University, Team S2-G1, Menagarishvili Fall 2018
Member of Appalachian State University, Team S2-G1, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S2G1
3 Members
10 Guides authored