Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

  • Optical Drive
  • 5 steps

Flags

0

  • BackToshiba Satellite C55-A5286

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Optical Drive               
  • Unplug the AC adapter and all other auxiliary components from the laptop

Unplug the AC adapter and all other auxiliary components from the laptop

1024

Step 2

  • Unscrew the only screw (5 mm) that is holding on the removable back panel and remove the back panel.

Unscrew the only screw (5 mm) that is holding on the removable back panel and remove the back panel.

Step 3

  • Remove the two 5-mm screws near the disk drive on the back panel. These two screws are above and below the manufacturer’s sticker.

Remove the two 5-mm screws near the disk drive on the back panel. These two screws are above and below the manufacturer’s sticker.

Step 4

  • Under the back panel, remove the 4-mm screw holding the disk drive in place.

Under the back panel, remove the 4-mm screw holding the disk drive in place.

Step 5

  • Carefully slide the optical drive out of its place in the laptop.

Carefully slide the optical drive out of its place in the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Nicole Zellers                     

Member since: 11/06/2018

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       IUPUI, Team S1-G5, Hovde Fall 2018                        

                                                  Member of IUPUI, Team S1-G5, Hovde Fall 2018 



                    IUPUI-HOVDE-F18S1G5                     


                                            2 Members                     


                                            6 Guides authored                     

William Totman - Jul 21, 2022

Reply

Not a medium effort at all - very easy.

…although, I did have to use an iFixt It needle-nose tweezer to pull the middle 5mm screw out after it was unscrewed - it would not fall out nor did it cling to the screwdriver.