Difficulty
Moderate
Steps
6
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Lower Case
- 4 steps
Flags
0
BackToshiba Satellite C50D-A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Click button 1 to the unlocked position.
- This button will have a 1 by it.
Click button 1 to the unlocked position.
This button will have a 1 by it.
1024
Step 2
- Push and hold button 2 to the left.
- As you push button 2 to the left position, simultaneously lift up the battery pack.
- This button will have a 2 by it.
Push and hold button 2 to the left.
As you push button 2 to the left position, simultaneously lift up the battery pack.
This button will have a 2 by it.
Step 3
Lower Case
- Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.
Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.
Step 4
- Remove the one 2.5mm Phillips #1 middle plate screw.
Remove the one 2.5mm Phillips #1 middle plate screw.
Step 5
- Lift up the middle vent panel.
- Set the panel to the side.
Lift up the middle vent panel.
Set the panel to the side.
Step 6
- Using the plastic opening tool, remove the outer panel and set to the side.
- Be careful not to break the back of the computer.
Using the plastic opening tool, remove the outer panel and set to the side.
Be careful not to break the back of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Amber van Solingen
Member since: 01/29/2018
657 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
University of Alabama, Team S3-G11, Bedsole Spring 2018
Member of University of Alabama, Team S3-G11, Bedsole Spring 2018
UA-BEDSOLE-S18S3G11
3 Members
12 Guides authored