Difficulty
Very easy
Steps
6
Time Required
1 - 3 minutes
Sections
1
- Back Panel
- 6 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Satellite A85-S107 15"
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Power off the laptop.
- Disconnect the power cable from the laptop. If you do not, electric shock may result.
Power off the laptop.
Disconnect the power cable from the laptop. If you do not, electric shock may result.
1024
Step 2
- Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
- Unlock the battery by sliding the tab shown to the right.
- This tab will latch into place.
Flip the laptop over and orient it such that the battery faces towards you and the front faces away from you as shown in the diagram.
Unlock the battery by sliding the tab shown to the right.
This tab will latch into place.
Step 3
- Slide the tab shown to the left and remain holding it.
- This tab does not lock into place like in the first step.
- Place your thumb on the grips of the battery as shown.
- While holding onto the grips, pull the battery towards you and away from the laptop.
Slide the tab shown to the left and remain holding it.
This tab does not lock into place like in the first step.
Place your thumb on the grips of the battery as shown.
While holding onto the grips, pull the battery towards you and away from the laptop.
Step 4
- Loosen this 5 mm Phillips #0 screw found in the center of the lower case.
- The screw will not come out completely, it will stay connected to the center plate.
Loosen this 5 mm Phillips #0 screw found in the center of the lower case.
The screw will not come out completely, it will stay connected to the center plate.
Step 5
- Remove the center plate by lifting it and sliding it to the right.
- If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that the screw is loose before attempting again.
Remove the center plate by lifting it and sliding it to the right.
If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that the screw is loose before attempting again.
Step 6
- The computer should be open with many of the internal components shown. You can now access the RAM, and wireless card.
The computer should be open with many of the internal components shown. You can now access the RAM, and wireless card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Shravani Kakarla
Member since: 03/11/2014
107 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 1-5, Cichon Spring 2014
Member of UMass Dartmouth, Team 1-5, Cichon Spring 2014
UMASSD-CICHON-S14S1G5
4 Members
2 Guides authored