Difficulty
Moderate
Steps
33
Time Required
30 minutes
Sections
9
- Battery
- 2 steps
- Optical Drive
- 3 steps
- CD Drive
- 2 steps
- Wi-Fi/Memory Cover
- 2 steps
- Wi-Fi Card
- 4 steps
- Keyboard
- 5 steps
- Display Assembly
- 6 steps
- Upper Case
- 5 steps
- Motherboard
- 4 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackToshiba Satellite A75-S226
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure battery-lock is in the unlock position.
- Slide button to the left.
Make sure battery-lock is in the unlock position.
Slide button to the left.
1024
Step 2
- Lift battery out of the computer.
Lift battery out of the computer.
Step 3
Optical Drive
- Remove the two 5.62 mm screws from the optical drive cover.
Remove the two 5.62 mm screws from the optical drive cover.
Step 4
- Remove the optical drive cover.
- A plastic opening tool or a fingernail may be helpful in lifting it from its groove.
Remove the optical drive cover.
A plastic opening tool or a fingernail may be helpful in lifting it from its groove.
Step 5
- Using the inset divot, push the optical drive out of the laptop to remove.
Using the inset divot, push the optical drive out of the laptop to remove.
Step 6
CD Drive
- Remove the 8.6 mm screw.
Remove the 8.6 mm screw.
Step 7
- Push the bottom left corner of the CD Drive until the drive protrudes from the case.
- When a good amount of the CD Drive is showing on the right side, gently pull it out completely.
Push the bottom left corner of the CD Drive until the drive protrudes from the case.
When a good amount of the CD Drive is showing on the right side, gently pull it out completely.
Step 8
Wi-Fi/Memory Cover
- Remove the 5.75 mm screw from the cover panel.
- Turn the laptop over with the screen facing down.
Remove the 5.75 mm screw from the cover panel.
Turn the laptop over with the screen facing down.
Step 9
- Lift up the cover panel using a plastic opening tool.
Lift up the cover panel using a plastic opening tool.
Step 10
Wi-Fi Card
- Remove the 5.64 mm screw from the bottom of the crossing bar.
- Remove the crossing bar.
Remove the 5.64 mm screw from the bottom of the crossing bar.
Remove the crossing bar.
Step 11
- Use a plastic opening tool to disconnect the black and white antenna cable’s connectors from the Wi-Fi card.
- Note that the black wire is connected to the port that is labeled main.
Use a plastic opening tool to disconnect the black and white antenna cable’s connectors from the Wi-Fi card.
Note that the black wire is connected to the port that is labeled main.
Step 12
- Use fingers to push the clips away from memory card.
Use fingers to push the clips away from memory card.
Step 13
- Use fingers to remove the Wi-Fi card.
Use fingers to remove the Wi-Fi card.
Step 14
Keyboard
- Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
- It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel’s sides and then front edge.
Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel’s sides and then front edge.
Step 15
- Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
Step 16
- Remove the two 3.67 mm screws from the top corners of the keyboard.
Remove the two 3.67 mm screws from the top corners of the keyboard.
Step 17
- Use fingers to lift up the keyboard from the top.
- Do not try to remove the keyboard completely because it is still attached to the motherboard.
Use fingers to lift up the keyboard from the top.
Do not try to remove the keyboard completely because it is still attached to the motherboard.
Step 18
- Remove the cable connecting the keyboard with the motherboard.
- Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.
- Lift up and remove the keyboard.
Remove the cable connecting the keyboard with the motherboard.
Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.
Lift up and remove the keyboard.
Step 19
Display Assembly
- Remove the 3.76mm screw from the ground wire.
Remove the 3.76mm screw from the ground wire.
Step 20
- Use the plastic opening tool to remove the wire.
Use the plastic opening tool to remove the wire.
Step 21
- Gently pull the black and white wires out of the upper case.
- Do not pull the wire too much, or you can damage the wire.
Gently pull the black and white wires out of the upper case.
Do not pull the wire too much, or you can damage the wire.
Step 22
- Remove the 8.6 mm screw on left side of upper case.
Remove the 8.6 mm screw on left side of upper case.
Step 23
- Remove two 8.6 mm screws on the back corners of the laptop.
Remove two 8.6 mm screws on the back corners of the laptop.
Step 24
- Lift up the display assembly to remove it.
Lift up the display assembly to remove it.
Step 25
Upper Case
- Use the Phillips screwdriver to remove the two 3.7 mm screws from the battery compartment.
- Then remove the fourteen 8.6 mm screws from the bottom of the case.
Use the Phillips screwdriver to remove the two 3.7 mm screws from the battery compartment.
Then remove the fourteen 8.6 mm screws from the bottom of the case.
Step 26
- Use the screwdriver to remove six 8.6 mm screws from the top of the case.
Use the screwdriver to remove six 8.6 mm screws from the top of the case.
Step 27
- Use the plastic opening tool to remove the two speaker wire connectors and the trackpad connector from the motherboard.
Use the plastic opening tool to remove the two speaker wire connectors and the trackpad connector from the motherboard.
Step 28
- With the plastic opening tool, pry around the entire laptop to separate the upper case.
With the plastic opening tool, pry around the entire laptop to separate the upper case.
Step 29
- Lift up the upper case to remove.
Lift up the upper case to remove.
Step 30
Motherboard
- Using the Phillips Screwdriver, remove the two 8.6 mm screws from the front edge of the motherboard.
Using the Phillips Screwdriver, remove the two 8.6 mm screws from the front edge of the motherboard.
Step 31
- Remove the four screws holding the ports to the rear panel using the 3/16" Wrench.
Remove the four screws holding the ports to the rear panel using the 3/16" Wrench.
Step 32
- Lift up on the front edge of the motherboard while gently prying the case away from the ports on the right side of the computer.
- Repeat with the left side.
- There is a button for the card slot on the left side of the computer that may pop out if pressed. This button must be held in place while removing the motherboard.
Lift up on the front edge of the motherboard while gently prying the case away from the ports on the right side of the computer.
Repeat with the left side.
There is a button for the card slot on the left side of the computer that may pop out if pressed. This button must be held in place while removing the motherboard.
Step 33
- Lift the motherboard’s front edge up and then slide it forward.
Lift the motherboard’s front edge up and then slide it forward.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 9 other contributors
Garrett Gudgel
Member since: 10/05/2010
751 Reputation
13 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 4-43, Amido Fall 2010
Member of Cal Poly, Team 4-43, Amido Fall 2010
CPSU-AMIDO-F10S4G43
5 Members
26 Guides authored
