Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Upper Assembly
- 6 steps
- Speaker
- 3 steps
Flags
0
BackToshiba Satellite A65-S126
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over so the bottom is facing up.
- Slide each of the three tabs on the bottom half of the assembly into the unlocked position.
Flip the laptop over so the bottom is facing up.
Slide each of the three tabs on the bottom half of the assembly into the unlocked position.
1024
Step 2
- Gently lift the battery out of the computer.
Gently lift the battery out of the computer.
Step 3
Upper Assembly
- Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
Step 4
- Remove the WIFI module cover. It will pull right off.
Remove the WIFI module cover. It will pull right off.
Step 5
- Unplug the white and black wires from the WiFi module.
Unplug the white and black wires from the WiFi module.
Step 6
- Remove the twelve 8mm button head Phillips #00 B8 screws.
- Remove the two 14 mm button head Phillips #00 B14 screws.
- Remove the two 10 mm Phillips #00 battery compartment screws.
- Remove the two 8 mm Phillips #00 screws.
Remove the twelve 8mm button head Phillips #00 B8 screws.
Remove the two 14 mm button head Phillips #00 B14 screws.
Remove the two 10 mm Phillips #00 battery compartment screws.
Remove the two 8 mm Phillips #00 screws.
Step 7
- Remove the seven 4mm flat Phillips #00 screws.
- Remove the seven 20mm button head Phillips #00 screws.
Remove the seven 4mm flat Phillips #00 screws.
Remove the seven 20mm button head Phillips #00 screws.
Step 8
- Use the plastic opening tool to pry the two halves apart.
Use the plastic opening tool to pry the two halves apart.
Step 9
Speaker
- Locate the plug for the speaker wires on the bottom of the laptop.
Locate the plug for the speaker wires on the bottom of the laptop.
Step 10
- Unplug the speaker wire connector.
Unplug the speaker wire connector.
Step 11
- Remove the speakers by sliding them straight up. They should slide out with ease.
Remove the speakers by sliding them straight up. They should slide out with ease.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Cole Uhland
Member since: 09/30/2013
216 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 14-8, Forte Fall 2013
Member of Cal Poly, Team 14-8, Forte Fall 2013
CPSU-FORTE-F13S14G8
4 Members
8 Guides authored