Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Upper Assembly
  • 6 steps
  • Keyboard
  • 3 steps

Flags

0

  • BackToshiba Satellite A65-S126

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so the bottom is facing up.
  • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

Flip the laptop over so the bottom is facing up.

Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

1024

Step 2

  • Gently lift the battery out of the computer.

Gently lift the battery out of the computer.

Step 3

              Upper Assembly
  • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

Step 4

  • Remove the WIFI module cover. It will pull right off.

Remove the WIFI module cover. It will pull right off.

Step 5

  • Unplug the white and black wires from the WiFi module.

Unplug the white and black wires from the WiFi module.

Step 6

  • Remove the twelve 8mm button head Phillips #00 B8 screws.
  • Remove the two 14 mm button head Phillips #00 B14 screws.
  • Remove the two 10 mm Phillips #00 battery compartment screws.
  • Remove the two 8 mm Phillips #00 screws.

Remove the twelve 8mm button head Phillips #00 B8 screws.

Remove the two 14 mm button head Phillips #00 B14 screws.

Remove the two 10 mm Phillips #00 battery compartment screws.

Remove the two 8 mm Phillips #00 screws.

Step 7

  • Remove the seven 4mm flat Phillips #00 screws.
  • Remove the seven 20mm button head Phillips #00 screws.

Remove the seven 4mm flat Phillips #00 screws.

Remove the seven 20mm button head Phillips #00 screws.

Step 8

  • Use the plastic opening tool to pry the two halves apart.

Use the plastic opening tool to pry the two halves apart.

Step 9

              Keyboard
  • Using a screw driver for assistance, pop open the plastic cover and snap it off of the hinges. Repeat on the opposite side.

Using a screw driver for assistance, pop open the plastic cover and snap it off of the hinges. Repeat on the opposite side.

Step 10

  • Remove the two 3mm Phillips #00 screws.

Remove the two 3mm Phillips #00 screws.

Step 11

  • Slide keyboard out and away from the upper assembly.

Slide keyboard out and away from the upper assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Aditya Varkhedi

Member since: 10/01/2013

104 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team 14-8, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 14-8, Forte Fall 2013 



                    CPSU-FORTE-F13S14G8                     


                                            4 Members                     


                                            8 Guides authored