Toshiba Satellite A305 S6848 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          20 minutes            

Sections

2

• Battery
• 3 steps
• LCD Screen
• 8 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackToshiba Satellite A305D-S6848

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Close laptop and turn it upside down.

Close laptop and turn it upside down.

1024

Step 2

• Move the left locking hatch to the left.
• Hold the right spring latch to the right.

Move the left locking hatch to the left.

Hold the right spring latch to the right.

Step 3

• Carefully remove the battery from the laptop.

Carefully remove the battery from the laptop.

Step 4

              LCD Screen               

• Remove the 6 rubber tabs on the housing using the metal spudger.

Remove the 6 rubber tabs on the housing using the metal spudger.

Step 5

• Remove the six 5.8 mm screws using the Phillip’s #0 screwdriver.

Remove the six 5.8 mm screws using the Phillip’s #0 screwdriver.

Step 6

• Pry out plastic housing on all sides.

Pry out plastic housing on all sides.

Step 7

• Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.

Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.

Step 8

• Remove the four 5.8 mm screws using the Phillip’s #0 screwdriver.

Remove the four 5.8 mm screws using the Phillip’s #0 screwdriver.

Step 9

• Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip’s #0 screwdriver.

Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip’s #0 screwdriver.

Step 10

• Pull the screen down.
• Pull off tape and take our video connector.

Pull the screen down.

Pull off tape and take our video connector.

Step 11

• Remove cold cathode fluorescent light bulb connector.

Remove cold cathode fluorescent light bulb connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Joshua E Hong                     

Member since: 11/06/2017

449 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Baylor, Team S8-G1, Johnson Fall 2017                        

                                                  Member of Baylor, Team S8-G1, Johnson Fall 2017 



                    BU-JOHNSON-F17S8G1                     


                                            2 Members                     


                                            8 Guides authored