Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Satellite A215-S7425

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn off the computer.
  • Disconnect the charging cable from computer.
  • Failure to unplug the cable could result in electric shock.
  • Flip the computer upside down.

Turn off the computer.

Disconnect the charging cable from computer.

Failure to unplug the cable could result in electric shock.

Flip the computer upside down.

1024

Step 2

  • Slide latches labeled #1 and #2, located outside the battery cover, away from each other.
  • Latch #1 will click over and stay while latch #2 will have to be held for battery to release.

Slide latches labeled #1 and #2, located outside the battery cover, away from each other.

Latch #1 will click over and stay while latch #2 will have to be held for battery to release.

Step 3

  • Gently lift and pull the battery out of the device.

Gently lift and pull the battery out of the device.

Step 4

              RAM
  • Locate the RAM vented plastic cover in the center of the device.

Locate the RAM vented plastic cover in the center of the device.

Step 5

  • Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks.

Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks.

Step 6

  • Locate 2 metal pinchers on either side of the 1st RAM stick.
  • Use a finger from each hand to push the 2 pinchers simultaneously away from the stick of RAM and towards the exterior of the case.
  • The RAM stick will automatically rise up. Gently pull out the RAM stick with one hand.
  • The use of a anti-static wrist strap while working with the RAM is advise to prevent electrostatic discharge(ESD) from damaging the RAM.

Locate 2 metal pinchers on either side of the 1st RAM stick.

Use a finger from each hand to push the 2 pinchers simultaneously away from the stick of RAM and towards the exterior of the case.

The RAM stick will automatically rise up. Gently pull out the RAM stick with one hand.

The use of a anti-static wrist strap while working with the RAM is advise to prevent electrostatic discharge(ESD) from damaging the RAM.

Step 7

  • To remove the 2nd RAM stick, repeat previous steps.
  • You will be unable to remove 2nd RAM stick if the first one is not removed first.

To remove the 2nd RAM stick, repeat previous steps.

You will be unable to remove 2nd RAM stick if the first one is not removed first.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Marianne

Member since: 09/08/2014

647 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Pasco Hernando, Team 5-2, Prince Fall 2014                        

                                                  Member of Pasco Hernando, Team 5-2, Prince Fall 2014 



                    PHSC-PRINCE-F14S5G2                     


                                            10 Members                     


                                            12 Guides authored