Difficulty
Easy
Steps
9
Time Required
5 - 10 minutes
Sections
2
- Battery
- 2 steps
- Optical Drive
- 7 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackToshiba Satellite A215 S4697
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Close the laptop and turn it over so that the base is facing upwards and the spine is facing away from you.
- Find the battery compartment.
- Slide the left slider which is just beneath the battery compartment into its leftmost position.
Close the laptop and turn it over so that the base is facing upwards and the spine is facing away from you.
Find the battery compartment.
Slide the left slider which is just beneath the battery compartment into its leftmost position.
1024
Step 2
- Slide and hold the right slider into its rightmost position. Lift the battery out of the compartment.
- Do not touch the gold nodes inside the compartment.
Slide and hold the right slider into its rightmost position. Lift the battery out of the compartment.
Do not touch the gold nodes inside the compartment.
Step 3
Optical Drive
- Turn computer over so that the battery compartment is facing up and is at the top.
- Locate and unscrew one captive Phillips #1 screw located at the center.
- A captive screw cannot be completely removed from the device’s component.
Turn computer over so that the battery compartment is facing up and is at the top.
Locate and unscrew one captive Phillips #1 screw located at the center.
A captive screw cannot be completely removed from the device’s component.
Step 4
- Use a plastic opening tool to open the motherboard access cover.
- Do not touch the motherboard.
Use a plastic opening tool to open the motherboard access cover.
Do not touch the motherboard.
Step 5
- Remove one 1.5mm Phillips #1 screw located near the top left edge of the opening.
Remove one 1.5mm Phillips #1 screw located near the top left edge of the opening.
Step 6
- Flip your device right side up, and rotate it so that the optical drive is facing you.
- Insert a paper clip into a manual release switch located to the right of the automatic release button.
- Optical Drive will not release if you insert the clip diagonally. Make sure to insert the clip straight into the switch.
Flip your device right side up, and rotate it so that the optical drive is facing you.
Insert a paper clip into a manual release switch located to the right of the automatic release button.
Optical Drive will not release if you insert the clip diagonally. Make sure to insert the clip straight into the switch.
Step 7
- Gently pull out the disk drive until you can see the metallic case of the optical drive.
- Hold the metal case and continue to pull the drive out toward you.
Gently pull out the disk drive until you can see the metallic case of the optical drive.
Hold the metal case and continue to pull the drive out toward you.
Step 8
- Once you see the yellow labels on the disk drive, fully retract the disk mount until you hear a click.
Once you see the yellow labels on the disk drive, fully retract the disk mount until you hear a click.
Step 9
- Continue to pull the disk drive toward you until it is completely removed from the laptop’s housing.
Continue to pull the disk drive toward you until it is completely removed from the laptop’s housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 7 other contributors
Mike Dongyub Ryu
Member since: 04/16/2013
566 Reputation
2 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 4-12, Maness Spring 2013
Member of Cal Poly, Team 4-12, Maness Spring 2013
CPSU-MANESS-S13S4G12
4 Members
12 Guides authored