Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

2

  • Battery
  • 2 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackToshiba Satellite A105-S4074

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • To prevent electrical shock, make sure the computer is turned off; and disconnect the power adapter from the computer and electrical outlet prior to beginning any repairs on this device.
  • Turn the laptop upside down with the battery facing you.

To prevent electrical shock, make sure the computer is turned off; and disconnect the power adapter from the computer and electrical outlet prior to beginning any repairs on this device.

Turn the laptop upside down with the battery facing you.

1024

Step 2

  • Slide both the left and right battery release tabs outwards away from center of the laptop.
  • Right release tab will remain locked in place.
  • While still holding the left release tab, slide the battery towards you using your right hand.
  • Fully remove the battery from the laptop.

Slide both the left and right battery release tabs outwards away from center of the laptop.

Right release tab will remain locked in place.

While still holding the left release tab, slide the battery towards you using your right hand.

Fully remove the battery from the laptop.

Step 3

              Hard Drive               
  • Turn the laptop around so that the battery slot is facing away from you, and locate the hard drive access panel in the lower left-hand corner.
  • Locate the hard drive access panel in the lower left-hand corner on the bottom of the laptop, and loosen the 4.0 mm screw in the top center of the panel using the Phillips #1 screwdriver.
  • This is a captive screw and will remain intact with the panel.
  • Carefully remove the panel with your fingers by lifting the edge at the indent.

Turn the laptop around so that the battery slot is facing away from you, and locate the hard drive access panel in the lower left-hand corner.

Locate the hard drive access panel in the lower left-hand corner on the bottom of the laptop, and loosen the 4.0 mm screw in the top center of the panel using the Phillips #1 screwdriver.

This is a captive screw and will remain intact with the panel.

Carefully remove the panel with your fingers by lifting the edge at the indent.

Step 4

  • You should now have full access to the hard drive.
  • Slide the hard drive to the left.
  • Gently lift the hard drive from the side closest to you and remove it.

You should now have full access to the hard drive.

Slide the hard drive to the left.

Gently lift the hard drive from the side closest to you and remove it.

To reassemble your device after replacing the hard drive, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Ryan Bortnick                     

Member since: 03/20/2017

692 Reputation

                                      5 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       UMass Dartmouth, Team S2-G1, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S2-G1, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S2G1                     


                                            4 Members                     


                                            10 Guides authored