Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Keyboard
  • 3 steps
  • WiFi Card
  • 1 step

Flags

0

  • BackToshiba Satellite A105-S4011

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

1024

Step 2

  • Hold the release switch and pull out the battery towards you.

Hold the release switch and pull out the battery towards you.

Step 3

              Keyboard               
  • Make sure to turn off the laptop, unplug the device and/or remove any batteries.
  • Open the laptop so the display screen is bent fully back with the display facing upward, parallel to the surface you are working on.
  • Wedge the Phillips 00 screwdriver above the F1 key, and separate the top piece of plastic from the body of the laptop. Don’t worry about breaking it! You will need to forcefully wedge the screwdriver under the plastic, simultaneously pushing upward and forward.
  • Once that section has popped up, work on pulling the rest of the plastic piece up and out, alternating from left to right.

Make sure to turn off the laptop, unplug the device and/or remove any batteries.

Open the laptop so the display screen is bent fully back with the display facing upward, parallel to the surface you are working on.

Wedge the Phillips 00 screwdriver above the F1 key, and separate the top piece of plastic from the body of the laptop. Don’t worry about breaking it! You will need to forcefully wedge the screwdriver under the plastic, simultaneously pushing upward and forward.

Once that section has popped up, work on pulling the rest of the plastic piece up and out, alternating from left to right.

Step 4

  • Completely remove the plastic piece from the body of the laptop.
  • Using the Phillips 1 screwdriver, unscrew the two 3mm screws located at the top corners of the keyboard. (See the second picture for additional clarification.)

Completely remove the plastic piece from the body of the laptop.

Using the Phillips 1 screwdriver, unscrew the two 3mm screws located at the top corners of the keyboard. (See the second picture for additional clarification.)

Step 5

  • Without yanking, lift the keyboard up carefully.
  • Now that the board is free, cautiously undo and pull free the ribbon that connects the keyboard to the body of the laptop.

Without yanking, lift the keyboard up carefully.

Now that the board is free, cautiously undo and pull free the ribbon that connects the keyboard to the body of the laptop.

Step 6

              WiFi Card               
  • After removing the keyboard completely from the body of the laptop you will have a view of the WiFi card and other components of the inner laptop. (WiFi card labeled in picture 1 of this step section.)
  • After locating the WiFi card, the first step is to disconnect the the attached wires. (This is labeled in picture 2 of this step section.)
  • After disconnecting the wires, you can detach the WiFi card by pressing down on the clip that fastens the WiFi card located on the right side.
  • When you detach the card you will be able to pick the WiFi card up by sliding it out of position. Success!
  • You can now replace the WiFi card with another and reassemble the laptop.

After removing the keyboard completely from the body of the laptop you will have a view of the WiFi card and other components of the inner laptop. (WiFi card labeled in picture 1 of this step section.)

After locating the WiFi card, the first step is to disconnect the the attached wires. (This is labeled in picture 2 of this step section.)

After disconnecting the wires, you can detach the WiFi card by pressing down on the clip that fastens the WiFi card located on the right side.

When you detach the card you will be able to pick the WiFi card up by sliding it out of position. Success!

You can now replace the WiFi card with another and reassemble the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jonathan Beaudry                     

Member since: 04/08/2014

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team 4-6, Calaway Spring 2014                        

                                                  Member of UMass Dartmouth, Team 4-6, Calaway Spring 2014 



                    UMASSD-CALAWAY-S14S4G6                     


                                            4 Members                     


                                            8 Guides authored