Toshiba Satellite A105 S4011 Ram Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

2

• Battery
• 2 steps
• RAM
• 3 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

• BackToshiba Satellite A105-S4011

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

1024

Step 2

• Hold the release switch and pull out the battery towards you.

Hold the release switch and pull out the battery towards you.

Step 3

              RAM               

• Locate the screw that is holding the back cover in place and, unscrew it using the #1 Phillips Screwdriver.
• This screw cannot be taken out, it is a “captive” screw.

Locate the screw that is holding the back cover in place and, unscrew it using the #1 Phillips Screwdriver.

This screw cannot be taken out, it is a “captive” screw.

Step 4

• Using a plastic opening tool, pop off the back cover. Your going to insert the tool into the small slit located on the back cover piece.
• Be careful when prying the back cover off because you may damage the cover or crack the plastic.

Using a plastic opening tool, pop off the back cover. Your going to insert the tool into the small slit located on the back cover piece.

Be careful when prying the back cover off because you may damage the cover or crack the plastic.

Step 5

• Locate the RAM (green module pictured here), and the two prongs on each side of the module. Press the two prongs outwardly, and pull out the RAM module.
• Grounding yourself may be a good idea before actually touching the RAM module. This entails touching a conductive metal in order to remove any excess static energy in your body.

Locate the RAM (green module pictured here), and the two prongs on each side of the module. Press the two prongs outwardly, and pull out the RAM module.

Grounding yourself may be a good idea before actually touching the RAM module. This entails touching a conductive metal in order to remove any excess static energy in your body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 8 other contributors 

                    Lucas Salisbury                     

Member since: 04/18/2013

73 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team 4-14, Maness Spring 2013                        

                                                  Member of Cal Poly, Team 4-14, Maness Spring 2013 



                    CPSU-MANESS-S13S4G14                     


                                            4 Members                     


                                            10 Guides authored