Difficulty
Easy
Steps
5
Time Required
2 - 5 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackToshiba Satellite 1415-S105
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Two RAM slots allow up to 512MB of PC1600 DDR SDRAM.
What you need
Step 1
Memory Cover
- The RAM access panel is located near the middle of the bottom.
The RAM access panel is located near the middle of the bottom.
1024
Step 2
- Unscrew the single screw labeled F4 on the panel.
Unscrew the single screw labeled F4 on the panel.
Step 3
- Using a spudger, inserted into the notch under the screw hole, pry open and remove the cover.
Using a spudger, inserted into the notch under the screw hole, pry open and remove the cover.
Step 4
RAM
- Pull outward on each pair of restraining clips to free each chip.
Pull outward on each pair of restraining clips to free each chip.
Step 5
Removal
- The RAM chips can now be pulled out.
- This laptop supports a maximum of two memory modules. The largest capacity for each is 256MB of PC1600 DDR SDRAM.
The RAM chips can now be pulled out.
This laptop supports a maximum of two memory modules. The largest capacity for each is 256MB of PC1600 DDR SDRAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kiril Lange
Member since: 09/22/2014
943 Reputation
9 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 3-2, Brown Fall 2014
Member of USF Tampa, Team 3-2, Brown Fall 2014
USFT-BROWN-F14S3G2
3 Members
18 Guides authored