Difficulty
Easy
Steps
6
Time Required
3 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 3 steps
Flags
0
BackToshiba Qosmio X775-3DV80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn your laptop over so the underside is facing up.
Turn your laptop over so the underside is facing up.
1024
Step 2
- Identify the two sliding locks on either side of the battery.
- Simultaneously slide both locks outward to release the battery.
Identify the two sliding locks on either side of the battery.
Simultaneously slide both locks outward to release the battery.
Step 3
- Pull the battery straight out of its slot to remove it.
Pull the battery straight out of its slot to remove it.
Step 4
RAM
- Loosen the single screw on the service panel by twisting counterclockwise with a Phillips #00 screwdriver.
- It is a captive screw that will remain attached to the service panel.
Loosen the single screw on the service panel by twisting counterclockwise with a Phillips #00 screwdriver.
It is a captive screw that will remain attached to the service panel.
Step 5
- Using a spudger or plastic opening tool, pry off the service panel.
Using a spudger or plastic opening tool, pry off the service panel.
Step 6
- Using your fingers, pull the retaining clips away from the RAM sticks.
- Pull the RAM sticks out of the slots.
Using your fingers, pull the retaining clips away from the RAM sticks.
Pull the RAM sticks out of the slots.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Jesse Adam Ory
Member since: 03/24/2019
745 Reputation
7 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S2-G1, Bailey Spring 2019
Member of UMass Dartmouth, Team S2-G1, Bailey Spring 2019
UMASSD-BAILEY-S19S2G1
4 Members
14 Guides authored
