Difficulty
Easy
Steps
4
Time Required
1 minute
Sections
2
- Battery
- 2 steps
- RAM
- 2 steps
Flags
0
BackToshiba Qosmio X505-Q860
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off laptop before starting.
- Flip the switch on the right to the unlocked position.
Turn off laptop before starting.
Flip the switch on the right to the unlocked position.
1024
Step 2
- Hold the switch on the left and pull the battery up towards you, using the marked tab, to take it out.
Hold the switch on the left and pull the battery up towards you, using the marked tab, to take it out.
Step 3
RAM
- Use a JIS #0 screwdriver to remove the three 4.8mm long screws that secure the RAM cover.
- Lift the cover off using the indent for leverage.
Use a JIS #0 screwdriver to remove the three 4.8mm long screws that secure the RAM cover.
Lift the cover off using the indent for leverage.
Step 4
- Use a spudger or your fingers to push the RAM brackets outwards until the RAM pops up.
- Once the RAM stick is angled up, pull it out along the angle.
- Repeat this step for the lower ram card.
Use a spudger or your fingers to push the RAM brackets outwards until the RAM pops up.
Once the RAM stick is angled up, pull it out along the angle.
Repeat this step for the lower ram card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jonathan Kizzia
Member since: 02/05/2019
159 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Appalachian State University, Team S2-G3, Menagarishvili Spring 2019
Member of Appalachian State University, Team S2-G3, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S2G3
3 Members
12 Guides authored