Difficulty
Easy
Steps
5
Time Required
1 minute
Sections
2
- Battery
- 2 steps
- Keyboard
- 3 steps
Flags
0
BackToshiba Qosmio X505-Q860
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off laptop before starting.
- Flip the switch on the right to the unlocked position.
Turn off laptop before starting.
Flip the switch on the right to the unlocked position.
1024
Step 2
- Hold the switch on the left and pull the battery up towards you, using the marked tab, to take it out.
Hold the switch on the left and pull the battery up towards you, using the marked tab, to take it out.
Step 3
Keyboard
- Locate the plastic bar at the top of the keyboard.
- Wedge a plastic opening tool under the bar and pop the bar out.
Locate the plastic bar at the top of the keyboard.
Wedge a plastic opening tool under the bar and pop the bar out.
Step 4
- Unscrew the four 3.6mm long JIS #0 screws using the JIS screwdriver.
Unscrew the four 3.6mm long JIS #0 screws using the JIS screwdriver.
Step 5
- Lift the keyboard to get to the plastic ribbon underneath.
- Using the Spudger, press a small tab on the left side of the ribbon. Then pull the ribbon out from the casing.
Lift the keyboard to get to the plastic ribbon underneath.
Using the Spudger, press a small tab on the left side of the ribbon. Then pull the ribbon out from the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Danielle Lapensee-Rankine
Member since: 02/05/2019
516 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Appalachian State University, Team S2-G3, Menagarishvili Spring 2019
Member of Appalachian State University, Team S2-G3, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S2G3
3 Members
12 Guides authored