Toshiba Qosmio X305 Q704 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          15 - 20 minutes            

Sections

2

• Keyboard
• 4 steps
• Screen
• 6 steps

Flags

0

• BackToshiba Qosmio X305-Q704

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Find an edge of the red strip along the edge the computer and pry it off using a spudger.

Find an edge of the red strip along the edge the computer and pry it off using a spudger.

1024

Step 2

• Find an edge of the black cover piece around the keyboard and pry it up using the spudger.

Find an edge of the black cover piece around the keyboard and pry it up using the spudger.

Step 3

• Lift the keyboard up and detach the strip connecting the keyboard to the back of the laptop.

Lift the keyboard up and detach the strip connecting the keyboard to the back of the laptop.

Step 4

• Remove the keyboard from the Laptop.

Remove the keyboard from the Laptop.

Step 5

              Screen               

• Unscrew the four 10 mm screws with the Phillips #0 screwdriver.

Unscrew the four 10 mm screws with the Phillips #0 screwdriver.

Step 6

• Insert the iFixit opening tool into the side of the computer that separates the top and bottom of the laptop. Move the tool along the edge of the laptop until the cover can be separated from the device.
• Do not remove the panel from the device, as you’ll need to disconnect cables before the component can be fully removed.

Insert the iFixit opening tool into the side of the computer that separates the top and bottom of the laptop. Move the tool along the edge of the laptop until the cover can be separated from the device.

Do not remove the panel from the device, as you’ll need to disconnect cables before the component can be fully removed.

Step 7

• Disconnect all wires connecting the top piece to the bottom.

Disconnect all wires connecting the top piece to the bottom.

Step 8

• Disconnect all wires connecting the screen to the inside of the computer.

Disconnect all wires connecting the screen to the inside of the computer.

Step 9

• Remove the 6 mm screws holding the screen on to the laptop using a Phillips #0 screwdriver.

Remove the 6 mm screws holding the screen on to the laptop using a Phillips #0 screwdriver.

Step 10

• Remove the screen from the laptop.

Remove the screen from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    John Borden                     

Member since: 03/08/2019

220 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S1-G1, Botvin Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G1, Botvin Spring 2019 



                    UMASSD-BOTVIN-S19S1G1                     


                                            4 Members                     


                                            12 Guides authored