Difficulty
Moderate
Steps
4
Time Required
5 - 7 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackToshiba Qosmio X305-Q704
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Flip your device over so that you’re facing the back cover of your device.
Flip your device over so that you’re facing the back cover of your device.
1024
Step 2
- Use a Phillips #0 screwdriver to unscrew the single 8 mm screw and remove the RAM cover.
Use a Phillips #0 screwdriver to unscrew the single 8 mm screw and remove the RAM cover.
Step 3
- Using the iFixit opening tools, press on the two metal pieces holding the RAM cartridge in place. Do this for both RAM cards.
- The card will pop up at an angle so you can remove it by hand.
Using the iFixit opening tools, press on the two metal pieces holding the RAM cartridge in place. Do this for both RAM cards.
The card will pop up at an angle so you can remove it by hand.
Step 4
- Remove the RAM sticks from your device.
Remove the RAM sticks from your device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Ally Lougal
Member since: 03/12/2019
171 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S1-G1, Botvin Spring 2019
Member of UMass Dartmouth, Team S1-G1, Botvin Spring 2019
UMASSD-BOTVIN-S19S1G1
4 Members
12 Guides authored