Difficulty
Moderate
Steps
6
Time Required
3 minutes
Sections
1
- Internal Cooling Fan
- 6 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Portege Z835-P330
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Internal Cooling Fan
- Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
1024
Step 2
- Locate hidden screw found in the middle of back hardcover.
- Here you will find a proprietary Japanese Screw Head.
- Remove screw by using tool not provided by IFixit or by using the methods found here.
Locate hidden screw found in the middle of back hardcover.
Here you will find a proprietary Japanese Screw Head.
Remove screw by using tool not provided by IFixit or by using the methods found here.
Step 3
- Peel off hard cover to expose interior of device
Peel off hard cover to expose interior of device
Step 4
- Remove the two 1 mm screws using a Phillips #2 screwdriver.
Remove the two 1 mm screws using a Phillips #2 screwdriver.
Step 5
- Unplug the internal cooling fan by tugging gently on the wire attatched to the device’s motherboard
Unplug the internal cooling fan by tugging gently on the wire attatched to the device’s motherboard
Step 6
- Lift the internal cooling fan to remove the fan from the device
Lift the internal cooling fan to remove the fan from the device
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Dominic Whiting
Member since: 02/08/2018
879 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
University of North Texas, Team S2-G3, Thomas Spring 2018
Member of University of North Texas, Team S2-G3, Thomas Spring 2018
UNT-THOMAS-S18S2G3
4 Members
10 Guides authored
