Difficulty
Moderate
Steps
12
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- Screen
- 9 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackToshiba Portege R835-P56X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place the laptop with the battery facing up.
- Make sure the laptop is powered off and unplugged.
Place the laptop with the battery facing up.
Make sure the laptop is powered off and unplugged.
1024
Step 2
- Unlock the clips by pulling towards the open lock.
Unlock the clips by pulling towards the open lock.
Step 3
- Hold the unlock clip while pulling the battery away from the laptop.
Hold the unlock clip while pulling the battery away from the laptop.
Step 4
Screen
- Use the screwdriver to unscrew 18 screws.
- Remove the back cover of the laptop.
Use the screwdriver to unscrew 18 screws.
Remove the back cover of the laptop.
Step 5
- Remove the screw from the metal hinges in the top corners of the laptop as shown in the picture.
Remove the screw from the metal hinges in the top corners of the laptop as shown in the picture.
Step 6
- Disconnect the white plug with red and black wires located on the right-most upper corner with the chrome hinges pointed farthest away from you.
Disconnect the white plug with red and black wires located on the right-most upper corner with the chrome hinges pointed farthest away from you.
Step 7
- Remove the chrome hinges using the blue prying tool. The hinges should pop right off without must effort.
Remove the chrome hinges using the blue prying tool. The hinges should pop right off without must effort.
Step 8
- Remove the screws located underneath the hinges.
Remove the screws located underneath the hinges.
Step 9
- Using tweezers, remove the plastic caps from the top edge of the laptop screen, located near the front-facing camera. All but the cap closest to the camera should be removed.
Using tweezers, remove the plastic caps from the top edge of the laptop screen, located near the front-facing camera. All but the cap closest to the camera should be removed.
Step 10
- Remove the screws located underneath the plastic caps.
Remove the screws located underneath the plastic caps.
Step 11
- Snap the laptop screen casing off.
Snap the laptop screen casing off.
Step 12
- Disconnect the grey mesh wire from underneath the unattached laptop screen.
Disconnect the grey mesh wire from underneath the unattached laptop screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Anay Sanchez
Member since: 09/20/2017
467 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
University of North Texas, Team S6-G6, Thomas Fall 2017
Member of University of North Texas, Team S6-G6, Thomas Fall 2017
UNT-THOMAS-F17S6G6
3 Members
8 Guides authored